Rotomoulding transfer printing

The ROTO-TRANSTIP® range was developed by our R&D department to accommodate in’Mold as well as on’Mold/postMold applications, depending on customer requirements.

TRANSFERT ROTOMOULAGE ON MOLD PAGE TRANSFERT ROTOMOULAGE TIP

The advantages of the IN'MOLD ROTO-TRANSTIP® 871-873 range

  • Quick and easy application thanks to a self-sticking system and the scraper, which does not require time and energy-intensive friction in the area to be decorated.
  • No adhesive added via spray or other methods during fitting.
  • Application in mould at 20°C to 70°C (smooth mould) and 30°C to 50°C (fine grain mould), regardless of your decoration’s size.
  • No adhesive residue on the item after rotational moulding.
  • Resistant to abrasion as required by the strictest specifications.
  • Resistant to conventional cleaning agents.
  • Guaranteed durability, as confirmed by a report from one of our partner laboratories.
  • Your colour chart will be followed even after rotational moulding.

Rototranstip Inmold for large size

Rototranstip Inmold for small and medium size

Play Video
Play Video

The advantages of the POSTMOLD ROTO-TRANSTIP® 877 decorations

  • The item may be fitted after the process is finished once it is returned to room temperature, or 2-3 days or 2-3 weeks or more after rotational moulding. Fitting requires the item to have a clean and especially smooth surface condition, with no dust, powder or oil.
  • Prior creation of your items, and customisation upon despatch to the customer.
  • Quick and simple application thanks to a self-sticking system, which does not require time-consuming friction to stick. Our white scraper allows us to finish the fitting efficiently.
  • Item does not undergo flame treatment before fitting, so there is no application temperature range. Application must not be performed below 20°C, as is the case with any self-sticking system.
  • Flame treatment after ROTO-TRANSTIP® 877 application for fusion with PE.
  • Your colour chart will be followed even after flame treatment.
Play Video
TRANSTIP 877

The advantages of the POSTMOLD ROTO-TRANSTIP® 888 decorations

  • Can be applied as soon as the roto-moulded part has come to room temperature or 2-3 weeks or even months after production
  • Softer and more flexible than our previous version ROTO-TRANSTIP 877, ROTO-TRANSTIP 888 allows greater flexibility and easier application
  • ROTO-TRANSTIP 888 is more resistant to flaming than our previous version ROTO-TRANSTIP 877 and can therefore be flamed for a slightly longer period of time for an even better fusion with the polyethylene
  • Application on a smooth and clean surface, without oil, PE powder or dust
  • Quick and easy application due to our self-adhesive system which does not require a long friction to adhere to the PE
  • No flaming required before application
  • Application possible from 15°F like all self-adhesive systems
  • The flaming process after application of our ROTO-TRANSTIP 888 is very simple with an industrial gas burner. Please flame graphic area until the PE become shinny/glossy to be sure we have and strong fusion between the graphic and the PE.
  • Your colors pantone, RAL and graphic charts are respected even after flaming
  • Barcode, QR code possible and readable after flaming
Play Video
Are you looking for a customised design?

Using its innovative and revolutionary G.E.S.T. method (French acronym for Management of TIP Screen Printing Design) for defining technical needs, TIP will assist you with your project.

Our technical sales team will get back to you in under 24 hours.