Our products : decals

Our decals

This table provides an overview of our products range. All our products are subject to analysis and  pre-qualification previous any use.
Please feel free to contact  our national and international sales staff through this website. 
All of our markings are compliant with the « toy » standard.
Pantone or ral  or matching colours  are available for all our silkscreen products range.

Dry decal

Model Description Instructions Photos

TRANSTIP 812

  • Decal to be applied on any smooth and flat surfaces.
  • High diluent, oil and detergent resistance.
  • Cold recoated (according to required specifications).
  • Applicable decal on a soft surface.
N°020  TIP Sérigraphie - Transfert à sec - Transtip 812

TRANSTIP 815

 

  • Very high tack dry tansfer on transparent holder.
  • With very good adhesion on difficult surfaces, such as : Polypropylene (PP), polyethylene (PE), and so on …
  • Good diluent, oil and detergent resistance.
N°067  

TRANSTIP 817

  • « Large sizes » dry decal  on transparent holder to be applied on any  smooth and flat surfaces.
  • Maximum length : 1300 mm with a glossy finish.
N°055

TRANSTIP 818/836

  • « Small sizes » dry decal  on transparent holder to be applied on any smooth and flat surfaces.
  • High diluent, oil and detergent resistance.
  • Maximum size : 100 x 30 mm with a glossy finish.
N°055  

TRANSTIP 819

  • Elastic dry tranfer for moving matter.
  • Glossy finish.
  • The most occurring application : flexible PVC.
N°020  

TRANSTIP 824

  • Mat dry decal.
  • Light diluent, oil and detergent resistance.
N°085  

TRANSTIP 839

  • Dry decal on blue-coloured holder . High mechanical and chimical strength. To be applied on any metal or plastic base substrate with high or low surface energy.
  • Maximum size : 700 x 500 mm.
  • Glossy finish.
N°106  

TRANSTIP 854

  • Apolar  strong granulated surface dry decal.
  • Good diluent, oil and detergent resistance.
N°152  

TRANSTIP 865

  • Chrome/mirror dry decal on transparent holder to be applied on any smooth and flat surfaces.
  • Good rubbing alcohol resistance.
N°055  

Tire decal

Model Description Instructions Photos

TRANSTIP 855

  • « Banana shaped » self-adhesive dry decal conformable to the tire sidewall with a friction and peeling very high resistance.
  • Glossy finish. Bright and florescent colours.
  • Very quick and flexible  application with scraper.
  • Application : brand image.
N°150  

TRANSTIP 859

  • « Small right angles » self-adhesive dry decal conformable to the tire sidewall with a friction and peeling very high resistance.
  • Idem T855 but with right angles.
  • Glossy finish. Bright and florescent colours.
  • Very quick and flexible  application with scraper.
  • Application : for motor racing traceability, brand image.
N°150  

TRANSTIP 860

  • «Banana shaped » self-adhesive dry decal conformable to the tire sidewall with a friction and peeling very high resistance and an improved colours resistance due to the rubber degassing.
  • Glossy finish. Bright and florescent colours.
  • Very quick and flexible  application with scraper.
  • Application : brand image.
N°150  

TRANSTIP 864

  • « Banana shaped » self-adhesive dry decal conformable to the tire sidewall with a friction and peeling high resistance. With a zebra printing on the back to make the holder easy to identify.
  • Glossy finish. Bright and florescent colours.
  • Very quick and flexible  application with scraper.
  • Application : brand image.
N°150  

TRANSTIP 868

  • « Banana shaped » self-adhesive dry decal conformable to the tire sidewall with a friction , peeling and  rolling very high resistance . The holder may be right withdrawn after application.
  • Glossy finish. Bright and florescent colours.
  • Very quick and flexible  application with scraper.
  • Application : brand image.
N°150  

TRANSTIP 870

  • « Small right angles »self-adhesive dry decal  conformable to the tire sidewall with a friction and peeling very high resistance.Idem T859 but the holder may be left after application. 
  • Glossy finish. Bright and florescent colours.
  • Very quick and flexible  application with scraper.
  • Application : brand image.
N°150  

TRANSTIP 874

  • « Banana shaped » self-adhesive dry decal conformable to the tyre sidewall with a very high friction, peeling and rolling resistance.
  • Its elasticity makes it possible to be applied before and after tyre inflation. Therefore, you can mount and dismount tyre from its rim without damaging decal.
  • Decal final appearance on tyre is optimum 72h after application.
  • However, you can plan previous application at your factory the same way as on the paddocks.
  • The protective paper may be right withdrawn right after application or stay on the graphic as a protection sheet during the shipping between your workshop and the paddock.
  • Glossy finish. Bright and fluorescent colours.
  • Very quick and flexible application with scraper.
  • Application: brand image/ Corporate identity.
N°150  

Rubber decal

Model Description Instructions Photos

TRANSTIP 807

  • Large surfaces vulcanisable rubber decal. The decoration’s resistance is obtained through rubber vulcanisation.
  • Maximum size : 650 x 550 mm.
  • Satin finish.
Instruction sheet to define for each project  

TRANSTIP 850

  • Vulcanisable rubber decal. The decoration’s resistance is obtained through rubber vulcanisation.
  • Satin finish.
  • Methodology and recommendation are suggested previous application.
Instruction sheet to define for each project  

TRANSTIP 867

  • Transparent holder hot-stamped decal.
  • Application on technical rubber with  heat press.
  • Glossy finish.
  • Friction and peeling high resistance.
N°184  

Aerospace decal

Model Description Instructions Photos

TRANSTIP 804 AA

  • Technical decal with printing markers for application. Cold re-coated  according to aerospace specifications. Suitable for any other product with the same protective coating.
  • Excellent resistance to diluents, oils, detergents and aggressive cleaning agents according to the aerospace and armaments sector specifications.
  • Maximum length : 680 mm (see even more….).
N°035  

Rotomolding

Model Description Instructions Photos

TRANSTIP 851

  • PE rotomolding self-adhesive decal on transparent holder and white protective film to fit inside the mould.
  • To be applied in aluminium or steel, smooth or granulated mould using temperature from 30°C to 80°C.
  • Very high UV and friction resistance.
  • Glossy finish.
  • Application : for all PE rotomolded articles suitable to the mould.

The T851 is no longer produced because it is replaced by the T871-873-875 and 877

N°147  

TRANSTIP 863

  • PE rotomolding self-adhesive decal on transparent holder and white protective film to fit inside the mould.
  • To be applied in aluminium or steel, smooth or granulated mould using temperature from 30°C to 80°C.
  • Very high UV, friction, diluent, oil, gas and detergent resistance.
  • It differs from T851 because of a special adhesive suitable to a quick dry application for large size products.
  • Glossy finish.
  • Application : for all PE rotomolded articles suitable to the mould.
N°147  

TRANSTIP 871

  • PE rotomolding self-adhesive decal on transparent holder and white protective film to fit inside the mould.
  • To be applied in aluminium or steel, smooth or granulated mould using temperature from 20°C to 70°C.
  • Very high UV and friction resistance.
  • Median solvent and cleaning agent resistance.
  • High flame resistance
  • It differs from T863 because of a special adhesive which disappears after rotomolding.
  • Satin finish.
  • Application : for all PE rotomolded articles suitable to the mould.
N°147  

TRANSTIP 873

    • PE rotomolding self-adhesive decal on transparent holder and white protective film to fit inside the mould.
    • To be applied in aluminium or steel, smooth or granulated mould using temperature from 20°C to 70°C.
    • Very high UV and friction resistance.
    • High solvent and cleaning agent resistance.
    • Median flame resistance
    • It differs from T863 because of a special adhesive which disappears after rotomolding.
    • Satin finish.
    • Application: for all PE rotomolded articles suitable to the mould.
N°147  

TRANSTIP 875

    • PE rotomolding self-adhesive decal on transparent holder and white protective film to fit inside the mould.
    • To be applied in aluminium or steel, smooth or granulated mould using temperature from 20°C to 70°C.
    • Very high UV and friction resistance.
    • High solvent and cleaning agent resistance.
    • High flame resistance
    • It differs from T863 because of a special adhesive which disappears after rotomolding.
    • Satin finish.
    • The T875 can be print with the four colour process, for a real copy of your image.
    • Application: for all PE rotomolded articles suitable to the mould.
N°147  

TRANSTIP 877

  • PE rotomolding self-adhesive decal to be applied on the part after rotomolding process. It’s presented on a transparent support and white protection paper.
  • It is to be applied on cold part after several days or directly after rotomolding.
  • No flaming before application of T877.
  • Application of T877 with a plastic scraper and strong pressure.
  • To finish application, you need to flame slightly.
  • Very high UV resistance.
  • Good friction resistance.
  • Good resistance to solvents and cleansers.
  • Satin finish.
  • Any kind of rotomolded PE part with a compatible shape.
  • Ideal for small series or for parts with large volumes when inmold decal is not possible technically.
N°147

Hot stamp decal

Model Description Instructions Photos

TRANSTIP 810

  • A hot pressed thermal decal with white holder for meshed lock fabrics.
  • Printing markers for application when needed.
  • No use of the four-colour process.
  • No elasticity.
  • Matt finish.
  • Maximum size : according press.
N°061  

TRANSTIP 830

  • A hot pressed thermal decal with white holder for meshed lock fabrics.
  • Printing markers for application when needed.
  • It differs from T810 because of higher flexibity and adhesive system.
  • No use of the four-colour process.
  • Matt finish.
  • Maximum size : according press.
N°100  

TRANSTIP 834

  • A hot pressed thermal decal with opal holder for meshed lock fabrics.
  • For polyamide and PVC decorations.
  • Very superior scratch and solvent resistance.
  • No elasticity.
  • Matt finish
  • Hot press special manufacture.
To be defined with press manufacturer  

TRANSTIP 837

  • A hot pressed thermal decal with transparent holder for meshed lock fabrics.
  • Same elasticity and quality as per T830 but on tansparent holder. this allows a  more accurated application.
  • No use of the four-colour process.
  • Matt finish.
N°102

TRANSTIP 866

  • A hot pressed thermal and varnishable decal with transparent holder for coated fabric.
  • Own special laying system.
  •  Glossy finish depending on the used varnish during the laying.
To be defined according to the project  

Wet decal

Model Description Instructions Photos

TRANSTIP 802

  • Wet decal  with water holder removal. White holder with printing markers for application when needed.
  • Very good application on difficult substrates.
  • Good stripping off resistance.
  • Very good diluent, oil and detergent  resistance.
  • Glossy finish.
  • Maximum size ; 680 mm (or even more….).
N°049

TRANSTIP 821

  • Wet decal for granulated surface with water holder removal. White holder with printing markers for application when needed.
  • Very good application on granulated and release surfaces.
  • Good stripping off resistance.
  • Very good diluent, oil and detergent  resistance.
  • Glossy finish.
  • Maximum size ; 680 mm (or even more….).
N°038  

TRANSTIP 858

  • Wet decal.
  • Very good diluent, oil and detergent resistance.
  • Optimum adhesion from 72 hours onward.
To be defined according to the project

TRANSTIP 862

  • Freight car wet tranfer with outstanding resistance to vapour pressure.
  • Glossy finish.
  • Very good diluent, oil and detergent  resistance.
To be defined according to the project

Cycle/sliding decal

Model Description Instructions Photos

TRANSTIP 853

  • Water  sliding decal for cycle decoration. It is integrated between painting and varnish.
  • Suitable for high surface energy painting.
  • Compliant for 3D application.
  • Good UV resistance.
  • Glossy finish thanks to the used varnish during the positioning process.
N°162  

TRANSTIP 857

  • Water  sliding decal for cycle decoration. It is integrated between painting and varnish.
  • Suitable for the electrostatic powder coat.
  • Compliant for 3D application.
  • Good UV resistance.
  • Glossy finish thanks to the used varnish during the positioning process.
N°168  

TRANSTIP 869

  • Non-recoating water  sliding decal. It suits to the non-varnished carbon bicycle rims.
  • Glossy finish.
N°183  

Specific decal

Model Description Instructions Photos
  • We are in a constant further development of our products range.
  • Our aim is to find a technically high quality solution for our customers.
  • Please contact  your area sales support if you haven’t found what you are expecting in the above list.